Duncan
Colors4Ceramic
IndustrieStr. 28
91227 Diepersdorf bei Nürnberg
Deutschland
Tel. (+49)-9120-18094-0
Fax. (+49)-9120-18094-22
kontakt@duncan.de
www.duncan.de


Home > Techniken > Quik-Crackle

Quik-Crackle

Quik-Crackle

Basecoat

Wipe ware with damp sponge to remove dust. Apply base coat color (we chose Black) that you want to show through the cracks. Use either No. 10 Shader or 3½4” Flat Shader. Let dry.
Quik-Crackle

Apply Quik-Crackle

When base coat is dry, apply a smooth, even coat of Quik-Crackle. Clean brush immediately with water and Duncan Brush Cleaner, making sure no Quik-Crackle is left in the metal ferrule. Let Quik-Crackle dry for at least 20 minutes. Quik-Crackle can set overnight and the same exciting results will be achieved.
Quik-Crackle

Apply top color

Working quickly, use a clean, soft brush to apply an even coat of a contrasting top-coat color over the dry Quik-Crackle. To create a fine web-like cracking, sponge on the top coat. To create fine-line cracking, brush on a thin layer of top-coat color. To create large, bold cracking, brush on a heavy layer of top-coat color. Choose top-coat color for best results from the OS Acrylics line. Once the top-coat color has been applied, do not reapply more color after cracking starts.
Quik-Crackle

Spray on sealer

Spray 2 coats of Clear Gloss Spray Sealer onto all surfaces. Let dry after each coat.
Technik

Colors4Ceramic© - All rights preserved. Conception : Colors4Ceramic | Design & Creation e-shop : Luc Stell